The Model 70 Extreme Weather MB utilizes a Bell and Carlson™ lay-up composite stock that provides a solid feel and features trim and lightweight ergonomics. It has a textured charcoal gray matte finish for rugged good looks and improved grip in adverse conditions. The sculpted cheekpiece helps insure proper eye-to-scope alignment from any shooting position. The thick, black Pachmayr® Decelerator® pad helps take the felt recoil bite out of high-performance magnum cartridges.
Like all Model 70s today, it features the Pre'-64 type claw extractor with Controlled Round Feeding so the cartridge may be easily withdrawn from the chamber at any point after it leaves the magazine. It also means that the cartridge base is grabbed by the claw as it leaves the magazine so it enters the chamber straight, in line. And don't forget that the cartridge feed lips are machined as part of the receiver for improved reliability in feeding. The classic Three-Position Safety offers both on safe and fire positions, plus a middle position that locks the firing pin yet still allows the bolt to be operated, providing a greater margin of safety when checking the chamber condition or unloading.
Winchester model 70 Stainless Steel Action (Matte Stainless Finish)
Pre-64 Type Claw Extractor / Control Round Feeding
Drilled and Tapped
Bell and Carlson Composite Stock With Aluminum Bedding Block (Black With White Webbing)
Pachmayr Decelerator Recoil Pad
MOA Trigger System
Matte nickel Sling Swivel Studs
Jeweled Bolt Slide Finish
Hinged Floorplate (Stainless Steel)
Stainless Steel Trigger (Matte Finish)
Alloy Trigger Guard
Length of Pull 13-3/4"
Drop At Comb 1/2"
Drop At Heel 1/2"
Overall Length 42-3/4"
Overall Weight 7lbs 2oz
Matte Stainless Steel Finish on Action/Barrel
Black With White Webbing Stock Finish
Caliber Dictionary
The Below Information Has Been Provided From Our Gun Caliber Dictionary And Is Meant For Informational Purposes Only. It Is Not Intended to Describe The Unique Specifications For This Ammunition.
Properly "Caliber 30 Model of 1906," the 30-06 was developed at Springfield Armory for the 1903 Springfield rifle. The original 1903 cartridge, though very similar, used a round-nosed 220-grain bullet; the 1906 version used a 150-grain spitzer bullet with a slightly shorter case neck and case length of 2.494-inches. The 30-06, in Springfield, 1917 Enfield, and M1 Garand rifles, remained America's service cartridge through the Korean War. It was the most powerful cartridge ever adopted by a major military, and over time became America's most popular hunting cartridge. Today there are many good choices, but the 30-06 remains extremely popular throughout the world, suited for most North American big game and equally effective for African plains game. The most common standard loads today feature: 150-grain bullet at 2910 feet per second; 165-grain bullet at 2800 fps; and 180-grain bullet at 2700 fps. Choices in both rifles and ammunition are almost limitless. — Craig Boddington
