Hunting – Page 3 – Wholesale Hunter

SHOT AT DEER- BY CRAIG BODDINGTON

Across the country, it’s deer season! For some the best of the season is behind us, but for most American hunters the best part of the season is yet to come. This depends on where you live, depending on the season. Which, in turn, depends on local weather, deer densities, and management goals. Limits are based on the same! My friends in the Deep South tend to have amazingly long and lavish seasons, usually with multiple bucks allowed and lots of doe tags.

In the West and Midwest, we’re usually not so blessed. Deer densities are lower and the populations are more fragile. A “one-buck” license is more common. Whether you’re in South Carolina (where, uniquely, some counties still have no limit on bucks). Or, in Kansas, where we are a strict one-buck state, it makes sense to make every buck tag count. But it really doesn’t matter: The odds are with the deer! Whitetail or mule deer, there is no hundred-percent deer hunting in North America!

Dan Guillory 2019: Dan Guillory’s 2019 Kansas buck was the best of the season. Although genuine tracking was not required, this buck probably ran the farthest of any 2019 buck…despite a perfect lung shot with a 7x57. — Dan Guillory 2019: Dan Guillory’s 2019 Kansas buck was the best of the season. Although genuine tracking was not required, this buck probably ran the farthest of any 2019 buck…despite a perfect lung shot with a 7×57.

PIG POWER by Craig Boddington

Just after sunset we came around a bend in the trail. The pig was standing in deep shadow under an oak, good-sized, solitary, probably a boar. That’s about all we could tell, and that was enough. Donna’s shot looked good, but the pig rolled into a little depression just out of sight. Donna and our rancher friend, Tony Lombardo approached and immediately backed up…fast!

44 hog: This ugly hog was taken in a wild melee with dogs using a Smith & Wesson .44 Magnum. A big, open-sighted revolver is a great choice for hound hunting where shots are sure to be close, but not versatile enough in many situations.

The first shot was fine, but the pig didn’t accept that and was almost on top of them before it dropped to a quick second shot. It was not exactly a close call, but several exciting seconds! In fading light, we hadn’t appreciated that this was a really good boar, burly and heavy, with four inches of thick, sharp tusk showing above the gum line.

AG110923: A good-sized Texas porker, taken with a Winchester Model 71 in .348. Big-bore lever-actions are dramatically effective on hogs and fun to hunt with, but the aperture sight on this rifle limits range and, more importantly, becomes almost when the light goes.

THE VERSATILE LEVER-ACTION? By Craig Boddington

The lever-action is part of our heritage, as American as apple pie, motherhood, and John Wayne. In rifle tastes, many of us have gravitated to super-accurate, flat-shooting rifles; others to adaptable, fast-shooting (and also accurate) semiautomatics. I’m okay with these, but as I grow older, I find myself circling back to lever-actions!

A very good blacktail buck, taken with a Winchester M88 in .308 Winchester. Though not designed for lever-actions, the .308 has been chambered to a number of lever-actions…and there are few things that can’t be done with a .308.

The Winchester 1894 and Marlin 336 alone account for ten million rifles! The majority of these, thus the majority of lever-actions, were chambered to .30-30. Although mild by today’s standards, the .30-30 remains a fine deer cartridge!

No lever-action is an extreme-range platform. Depending on which action or model, lever guns are hampered by some combination of pressure limitations, action length, two-piece stocks, tubular magazines, and sight restrictions. Over time, many of these problems have been solved, or at least mitigated: All Henry, Marlin, Mossberg, and Savage lever-actions can easily be scoped, as can all Winchester 1894s since 1982, when “Angle Eject” came in. Historically, blunt-nosed bullets with poor aerodynamics had to be used in tubular magazines. Hornady’s Flex-Tip bullet with compressible polymer tip solved this, instantly improving ballistics.

Boddington used a Winchester M88 in .358 Winchester to take this Shiras moose on a tough-to-draw Wyoming permit. Although definitely not fast, the little .358 is a powerful cartridge that hits hard with little recoil.

Why not a .270?

Here’s a riddle: What cartridge is faster, more powerful, and shoots flatter than a 6.5mm Creedmoor…with similar recoil? And, is chambered to more rifles, with a wider selection of factory loads and component bullets?

270 lineup-light: Left to right: .243 Winchester, .260 Remington, 6.5mm Creedmoor, 7mm-08, .270 Winchester. All of these are great deer cartridges, but the .270 is far and away the fastest, most powerful, and most versatile of the group.

At the moment, it’s not true to say that everybody wants a 6.5mm Creedmoor. Right now, everybody wants whatever is ideal (or marginally suitable) for defending the hearth and home against virus-ridden zombie hordes. But I have to believe both happy and sane times will return, and we’ll spend more time thinking about hunting seasons past and looking forward to seasons ahead. I assume the Creedmoor Craze will continue, and everyone who wants a new hunting rifle will be longing for that amazing phenomenon, the 6.5mm Creedmoor.

.270-general purpose: Left to right: .270 Winchester, 7mm-08, 7mm Remington Magnum, .30-06, .300 Winchester Magnum. All of these are acceptable elk cartridges, with the .270 and 7mm-08 good minimal choices, but fully adequate at moderate ranges.

UNDERSTANDING THE .17’S By Craig Boddington

Legend has it that the .17s originated in Australia, during a time when they were overrun with non-native foxes, in pestilence plenty, but still with value on the fur market. The advantage to the .17 was, on fox-sized animals, the tiny, frangible bullet, pushed fast, would enter, do its work…but not exit, leaving the pelt intact except for one tiny hole.

The African Cape fox is similar in size to American foxes. All of the .17s are excellent for this class of game because the light, frangible bullets rarely exit and do little pelt damage. The rifle is a Marlin in .17 HMR, the rifle Boddington keeps handy on his Kansas farm.

The idea migrated to North America in the 1960s, with American wildcatters developing numerous .17-caliber cartridges on various small cases. In 1971 Remington necked down the 223 Remington case to create the 17 Remington. It is still the fastest factory cartridge, propelling a 20-grain bullet at 4250 fps.

In Praise Of Older Rifles By Craig Boddington

In this Wholesale Hunter Blog Craig Boddington discusses older rifles and compares the quality and value of older rifle Vs newer ones.

Crown recut: This inexpensive Remington .30-06 turned out to have a lop-sided crown, right group. We re-cut the crown at the range, a simple process (if you have the tools). Using the same factory ammo, it turned into a real tack-driver, center group.

Modern factory rifles are amazing, complete, reliable, and more accurate than ever before. In today’s dollars, basic bolt-actions, are more inexpensive than ever before. There are dozens of good models under $600, and some excellent new bolt-actions available for little more than half that. Almost invariably, most basic bolt-actions wear synthetic stocks, free-floated barrels, rust-resistant metal, and push-feed actions. No problem, they work and shoot well. And, of course, I shoot them, hunt with them, and write about them.

This custom .270 Winchester by Joe Balickie, on a left-hand Carl Gustav action, groups pretty well with everything…but it really likes the 130-grain GMX, top right. Naturally, that’s what Boddington uses to hunt with this rifle — This custom .270 Winchester by Joe Balickie, on a left-hand Carl Gustav action

However, my personal tastes run much more to good old walnut, mated and carefully fitted to blued steel. These features are available in new rifles of all action types. But you’ll pay more for them. It comes down to manufacturing costs. Synthetic is less costly than wood…and requires less hand-fitting and final finishing. Other action types, whether lever, semiauto, etc., are generally more expensive than basic bolt-actions; and controlled-round-feed (Mauser-type) bolt-actions are costlier than push-feed actions. Again, manufacturing costs: Number of parts, raw materials, and both machining and assembly time. Just the way it is!

A vintage .300 Savage on the California Central Coast. Rifle choices are somewhat regional; the Savage 99 was extremely popular on the West Coast and are seen on most used-gunracks. Used Marlins may be more common in the Upper Midwest.

RIFLE ACCURACY WITH DIFFERENT LOADS By Craig Boddington

Today’s factory rifles are, on average, more accurate than I thought possible when I started shooting. American hunters and rifle shooters have long been obsessed with raw rifle accuracy, probably more today than ever before because of the growing fascination with long-range shooting. How much accuracy is really needed depends entirely on what you intend to do. Bench-rest and thousand-yard competitors need all they can get, and so do varmint hunters. Most big-game hunters probably have more accuracy than is truly necessary—but it’s a wonderful confidence builder to know that your rifle is capable of producing teeny, tiny groups!

257 Roberts group: There’s no telling exactly what load a given rifle will shoot best…and it may not be the load you prefer to use. So far, Boddington’s Dakota .257 Roberts produces its best groups with Remington 100-grain round-nose Core-Lokt, not the most ideal hunting load for a flat-shooting cartridge. This rifle needs handloading and will get it!

That’s a valid reason to demand extreme accuracy—and it’s amazing how many of today’s basic, inexpensive factory rifles deliver. I think this is because, with modern manufacturing, factory tolerances are tighter than ever, with more consistent barrels. When I was a kid, we figured a factory bolt-action that produced 1.5-inch 100-yard groups was pretty darned good. Rifles shooting one inch and better were cause for bragging. Today it’s amazing how many factory bolt guns retailing for less than $500 will consistently produce one-inch 100-yard groups.

308 Win OR 30-06 Springfield? By Craig Boddington

Right now, the 6.5 Creedmoor is gathering all the headlines and glory. Fifty years ago, the 7mm Remington Magnum was America’s darling, for some years the world’s most popular cartridge to carry a “magnum” suffix. Both, to me, are anomalies. America is .30-caliber country!

308 blacktail: An excellent blacktail from northern California, taken with a Winchester M88 in .308. The 88 is one of several lever-actions chambered to the .308. Able to fit into short actions, the .308 offers a much larger choice of both rifles and actions than the .30-06.

It started in 1892 with the .30-40 Krag, and continued in 1895 with the .30-30, now 125 years old and still selling well. Introduced in 1906, the powerful .30-06 became the American standard. Introduced in 1963, the .300 Winchester Magnum was at first reviled: Too short in the neck, caught up in Winchester’s catastrophic pre-’64/post-’64 shift, and designed to replace the revered .300 H&H. The .300 Winchester Magnum did not take off well. However, the sun, moon, and stars realigned. Over time the .300 Winchester Magnum, a proper American .30-caliber, booted the 7mm Remington Magnum as the most popular magnum cartridge.

308 Dad M70: My Dad, Bud Boddington, took most of his game with this Winchester M70 .308. Dating to the 1950s, it has been shot little since Dad passed 20 years ago—but it still groups extremely well…like most .308s.

It remains to be seen if the 6.5mm Creedmoor will retain its current popularity, but I believe order will return to the universe and we will again become a .30-caliber nation, as we have been since the dawn of smokeless powder. However this plays out, two great and versatile .30-caliber cartridges will remain among our most popular choices. They are, of course, the .308 Winchester (aka 7.62×51 NATO) and the .30-06 Springfield (aka .30 U.S. Government, Model of 1906).

IN PRAISE OF PUMP GUNS! By Craig Boddington

Most upland and waterfowl seasons are over. Spring turkey season is coming up fast, so for many of us this is time to shop for a new turkey gun. Fine, but shotgunning is really about familiarity and fit (probably in that order). Turkey hunting is a bit different than most shotgunning because the birds are (more or less) stationary and you aim, but any time you invest in a new shotgun, it’s wise to also expend time and a bunch of shells in practice. Although they taste terrible, there are no bag limits on clay targets. Clays vary widely in speed, angle, and difficulty, but it really doesn’t matter if you shoot trap, skeet, sporting clays, or hand-thrown targets: Every clay you shoot at (and especially every target you hit!) will make you more effective with that new shotgun.

1979 AZ quail: Warner Glenn and Boddington in 1979 after a great morning on Arizona desert quail. Warner has a very early straight-gripped Model 12; Craig’s is his factory skeet Model 12, made in the 1950s. In ‘79 he’d had the gun for a decade, and it had seen a lot of use.

I am probably best-known as a “rifle guy,” not so much as a shotgunner, and definitely not a turkey hunter. The latter is valid: I hunt turkeys, but I am no turkey expert! Shotgunning in general is a slightly different story. The Kansas I grew up in had few deer and zero turkeys, but we had oceans of bobwhites and lots of pheasants.

UNLEADED BULLETS Some love ‘em, others hate ‘em…but they work! By Craig Boddington

The fancy term is “homogeneous alloy,” but we’re primarily talking about all-copper or copper-alloy rifle bullets, absent any trace of lead. There are two primary reasons to hunt with this type of bullet: Because you have to; or because you want to.

Barnes X, TSX, TTSX: The Barnes X-Bullet was the first effective copper-alloy expanding bullet. The TSX, center, added driving bands to reduce copper fouling, while the TTSX, right, added a polymer tip, which drives into the bullet upon impact to initiate expansion.

Without question, lead is a toxic metal, and lead poisoning is a serious and potentially fatal health hazard. Waterfowlers have been required to use non-toxic shot nationwide since 1991, now with multiple alternatives including alloys of bismuth, iron, tungsten, and zinc. A legal requirement to use non-lead bullets is newer and still uncommon…but that depends on where you live. Since 2007 California has banned hunting with lead bullets throughout the range of the endangered California condor. The condor, really the world’s largest vulture, is primarily a scavenger. Hard evidence is sketchy, but there is a chance a condor could ingest lead fragments or particles by eating carcasses of animals taken with lead bullets. California’s Central Coast, where I’ve lived for 25 years, is part of the so-called “condor zone.”