Compact, accurate and completely trustworthy, the REC7 is designed specifically for situations in which there’s no room for error. Styled in the familiar AR configuration, it’s a no-nonsense rifle you can trust with anything—including your life.
This tough-as-nails rifle was designed specifically to answer the call for a low-maintenance, enhanced reliability carbine. The REC7 rifle’s dependability stems largely from its innovative operating system. Using a minimum number of parts, the piston system separates heat and powder residue from the bolt carrier and trigger assembly. The rifle runs cool and clean, reducing maintenance requirements and increasing endurance.
The patented chrome-lined fluted gas block prevents excessive carbon buildup from operation under adverse conditions. The one-piece 17-4 stainless piston transfers energy to the anti-tilt bolt carrier. Machined from a monolithic block of 8620 steel, the carrier features an integral piston strike face. The Barrett Enhanced Bolt is made from high-strength 9310 steel. The bolt is designed specifically for use in the piston operated REC7, not just adapted from a direct gas bolt. The bolt’s gas-ring-free design is easy to clean. Reinforced at critical areas, every bolt is proofed and magnetic-particle inspected to guarantee reliable performance.
At the heart of the operating system is a nitrided, two-position, forward-venting gas plug that retains the piston. The piston can be accessed through the front of the gas block without removing the handguard so optical sights or laser devices do not need to be zeroed after routine maintenance. The REC7 rifle’s forged 7075 aluminum upper and lower receivers are Type 3 hardcoat anodized. The lower houses an ultra-dependable single-stage trigger. The upper supports a free-floated, hammer-forged, chrome-lined barrel with M4 feed ramps machined into the receiver and the barrel extension. A mil-spec A2 flash hider protects the muzzle.
In 5.56 NATO, the REC7 is everything you’d expect from a Barrett rifle, and then some.
Specifications :
- Caliber: 5.56 NATO
- Weight: 7.2 lbs. (3.26 kg)
- Rifle Overall Length: 33.25" (84.46 cm)
- Action: Gas Piston System Semi-Automatic
- Trigger: Geissele® trigger
- Safety: Select Fire
- Capacity: 30 Rounds
- Rifle Barrel Length: 16" (40.6 cm) barrel
- Rifle Barrel Twist: 1 in 7" (18 cm)
- Rifle Stock: MagPul® MOE 6 Position
The information below comes from our Gun Caliber Dictionary and is for
general reference only. It does not describe the specifications of this
particular item.
The 5.56X45mm NATO cartridge was designed by James Sullivan, a member of Eugene Stoner's engineering team that developed both the M16 rifle and its original cartridge. The 5.56X45mm NATO was adopted by the U.S. military in 1964 and by NATO in 1980. With bullet diameter of .224-inch, the original M193 military cartridge used a 55-grain bullet at 3250 fps; the current M855A1 cartridge, developed by FN, uses a 62.5-grain bullet at 3020 fps, offering greater range and better penetration. The civilian version of the 5.56X45mm is 223 Remington; the cartridges are dimensionally identical but military chamber dimensions and specifications for military brass are different. It is considered safe to use 223 Remington ammo in a 5.56X45MM NATO chamber, but not a good idea to use 5.56X45mm ammo in a rifle specifically chambered for the 223 Remington. Although the stopping power of .22-caliber bullets remains controversial the 5.56X45mm has served well in now multiple generations of M16 rifles.
—
Craig Boddington
