Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001" increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification. To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002", to allow for brass spring back and bullet tension. Shellholder and dies sold separately.
Technical Information
Material: Heat Treated Steel
Features : Hand polished with a surface hardness of RC 60-62
Titanium Nitride surface treatment to increase the effective surface hardness and reduce sizing friction.
Dimensions: 1/2" O.D x 3/8" long
Accessories:
Notes:
Freely interchange in all Redding bushing type neck sizing dies.
To Determine Bushing Size, measure the outside neck diameter of a loaded cartridge with a precision micrometer. From this measurement subtract .001" to .002", to allow for brass spring back and bullet tension.
By selecting the correct bushing you can provide just the right amount of neck tension to properly hold the bullet without excessive resizing.
No reviews yet
Be the first to review this item.
Shipping
Enter your ZIP code for an exact shipping cost on this item.
Hazardous-materials fees, where they apply, are included in the total shown.
