Baschieri & Pellagri Magnum Upland Game 410 ga. 3" 3/4 oz. #4 shot 1125 FPS Shotgun Ammunition 25 Rounds
For a game-stopping punch, use the Baschieri & Pellagri Upland Game line of products. With consistent patterns, low recoil, and quality components, these shot shells will fast become your favorite. Engineered precisely for upland hunting, you can expect tighter patterns at longer distances and enough power to drop game with one shot.
Velocity: 1125 fps
Rounds: 25
Gauge: 410 ga
Length: 3"
Load: 3/4 oz
Shot: # 4
Nickle Plated 3% Antimony Lead Alloy shot, heat treated for extra hardness, uniformly round, accurately sized and consistently dense to produce a dense uniform shot pattern with a short shot string
The quality control represents for Baschieri & Pellagri a permanent feature before, during and after the production process.
Baschieri & Pellagri has a state of the art test bench with chemists and skilled technicians, who, every day, make several checks on components and shot shells, in order to guarantee the best products.
Stages:
Careful and rigorous selection of suppliers.
Continuous and methodical checks on the raw materials.
Constant checks during the whole production, up to 33 different and independent control operations for each shift.
Functional and performance tests of the finished products.
Qualified and professional assistance towards all stakeholders.
The complex of the quality procedures is developed and revised inside the company with the same compliance of the controls to the product development and its realization stages.
Our company as one of the first retailers on this product in the US have decided to do extensive testing of Baschieri & Pellagri shot shells before we offered them to the public. Our in house staff has found these shot shells to some of the highest quality ammunition we have even used. We have tested both lead and steel shot and found all shot to be extremely uniform in size varying only one and half thousands on an inch between pellets and found the shot size listed to be spot on industry standards. Lead shot ammunition was found to be a hard lead alloy that resist deforming and produce uniform patterns. The steel shot we have examined was so uniformly round it could be used as ball bearings. We simply never see this type of quality in inexpensive shells and they certainly rival any shells at any price. Another very unusually quality of Baschieri & Pellagri is their high velocity compared to other companies. Sure they have many shells of standard velocity we are all used to but they also have some lead shot loads at 1500 fps. Normally the top speed for lead is about 1350 fps due to the lead deforming. Steel shot is commonly pushed to 1500 FPS because it's hard enough to resist deforming. This is the first ammunition we have seen pushing lead at 1500 FPS, that is only possible due to the high quality h
The information below comes from our Gun Caliber Dictionary and is for
general reference only. It does not describe the specifications of this
particular item.
The 410 Gauge (410 Bore) shotgun cartridge is the only shotshell named by caliber (diameter) rather than the old "gauge" designation of round balls to the pound. Introduced in the U.S. in the early 1900s the 410 Gauge is the smallest shotshell in common use, offered in 2.5-inch loads with a 1/2-ounce payload and 3-inch loads with 3/4-ounce payloads. Most modern shotguns are chambered for 3-inch shells, but the longer shells cannot be used in guns with 2.5-inch chambers. 410 Gauge is a standard event in formal American Skeet competition. Because of its light recoil the 410 Gauge is often chosen as a "starter" shotgun for youngsters, but it is not an ideal choice; the light payload sharply limits range, effectiveness, and hitting ability, frustrating the efforts of generations of youngsters--and 410 slug loads are very marginal for deer. In the right hands at close range the 410 gauge is effective on upland game, but at its best it is a choice for experienced expert shotgunners.
—
Craig Boddington
