The DDM4 V7 Pro was designed for competitors looking for a platform to dominate podiums in today’s popular multi-gun matches. Built around our newest 18” Strength to Weight, Cold Hammer Forged barrel, this platform delivers the speed, controllability, and precision required to engage the most difficult multi-gun stages. The V7 Pro comes standard with the new MFR XS 15.0 M-LOK® rail, which offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. An uninterrupted Picatinny rail on top and M-LOK attachment points ensure plenty of real estate for optics and accessories and allow for the maximum sight radius for accurate shooting with rail mounted iron sights. The long 15” rail gives operators the option to have the support hand extended out closer to the muzzle, allowing them to drive the gun more precisely, and it prevents over-travel when transitioning between multiple targets. Competitors will also appreciate the larger latch provided by a BCMGUNFIGHTER Charging Handle for easier manipulation under magnified optics. The newly designed Muzzle Climb Mitigator redirects propellant gasses through calibrated ports, countering both recoil and muzzle climb. A Geissele Automatics Super Dynamic 3 Gun Trigger delivers rapid hits on target with its light, short pull and quick reset. Combined with the softened recoil impulse of a rifle-length gas system, this allows for shorter split times, more precise follow-up shots, and reduced fatigue. The rifle is finished off with the rugged and comfortable Daniel Defense Buttstock and Pistol grip.
Materials & Construction
• LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
• UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
• TRIGGER: Geissele Automatics Super Dynamic 3 Gun Trigger
• BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 18" S2W Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
• GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating, Rifle Length, Direct Impingement
• MUZZLE DEVICE: Daniel Defense Muzzle Climb Mitigator, Gen II, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
• BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP tested, Chrome Lined, Properly Staked Gas Key
• BUFFER: H Buffer
• SIGHTS: Sold Separately
• HANDGUARD: Daniel Defense MFR 15.0, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized
• RECEIVER EXTENSION: 6-Position Mil-Spec 7075-T6 Aluminum
• BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
• PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
• Made in the USA!
Caliber: 5.56mm NATO
Muzzle Thread: 1/2×28 TPI (Threads Per Inch)
Gas System: Rifle
Barrel Length: 18"
Profile: S2W® [Strength-to-Weight]
Product Weight: 7.40 lbs
Length: 34 ¾” – 37 7/8”
Magazine: DD Magazine
The information below comes from our Gun Caliber Dictionary and is for
general reference only. It does not describe the specifications of this
particular item.
The 5.56X45mm NATO cartridge was designed by James Sullivan, a member of Eugene Stoner's engineering team that developed both the M16 rifle and its original cartridge. The 5.56X45mm NATO was adopted by the U.S. military in 1964 and by NATO in 1980. With bullet diameter of .224-inch, the original M193 military cartridge used a 55-grain bullet at 3250 fps; the current M855A1 cartridge, developed by FN, uses a 62.5-grain bullet at 3020 fps, offering greater range and better penetration. The civilian version of the 5.56X45mm is 223 Remington; the cartridges are dimensionally identical but military chamber dimensions and specifications for military brass are different. It is considered safe to use 223 Remington ammo in a 5.56X45MM NATO chamber, but not a good idea to use 5.56X45mm ammo in a rifle specifically chambered for the 223 Remington. Although the stopping power of .22-caliber bullets remains controversial the 5.56X45mm has served well in now multiple generations of M16 rifles.
—
Craig Boddington
