Redding 22-250 Remington Improved 40° Type S Neck Bushing 3 Die Set

22-250 Remington Improved 40° Type S Full Size Bushing Die by REDDING RELOADING PRODUCTS Product Overview now offers the 22-250 Remington Improved 40° Type S Full Size Bushing Die. The Type S die allows you to full length resize while maintaining precise control of the case neck in one operation. The 22-250 Type S - Full Length Resizing/Bushing Die gives you the control and precision without over stressing the brass or growing the neck. Specifications and Features: Uses the same interchangeable bushings (.001" increments) as those used in our bushing style neck sizing dies The adjustable decapping rod allows you to adjust the bushing position and sizing only part of the neck length when desired Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case All Type S (except 17 and 20 Cal.) dies are supplied with both the standard size button and a decapping pin retainer Removing the bushing and all internal parts allows the Type-S full bushing die to be used as a body die *NOTE Bushings not included. The easiest way to determine the proper bushing size for your cartridge is to measure the neck diameter of several loaded or dummy rounds. (These dummy cartridges can be loaded with your old set of dies or a borrowed set.) Then and simply subtract 0.001" from the cartridge that had the smallest average measurement. This will allow for a slight amount of spring back and create a proper press fit for the bullet. *Please note* All defective returns must be made through Redding directly. You can visit their website by Clicking Here or call them at (607) 753-3331.