Redding 6mm Dasher Type S Full Die

6mm Dasher Type S Full Die by REDDING RELOADING PRODUCTS Product Overview now offers the 6mm Dasher Type S Full Size Bushing Die. The Type S die allows you to full length resize while maintaining precise control of the case neck in one operation. The 6mm Dasher has an adjustable decapping rod allows you to adjust the bushing position and sizing only part of the neck length when desired. These Type S Dies use the same .001" bushings that the neck dies use for interchangeability. Specifications and Features: Adjustable Decapping Rod Self Centering Bushing All Type S (except 17 and 20 Cal.) dies are supplied with a standard size button and a decapping pin retainer Removing the bushing and all internal parts allows the Type-S full bushing die to be used as a body die *NOTE Bushings not included. The easiest way to determine the proper bushing size for your cartridge is to measure the neck diameter of several loaded or dummy rounds. (These dummy cartridges can be loaded with your old set of dies or a borrowed set.) Then and simply subtract 0.001" from the cartridge that had the smallest average measurement. This will allow for a slight amount of spring back and create a proper press fit for the bullet. *Please note* All defective returns must be made through Redding directly. You can visit their website by Clicking Here or call them at (607) 753-3331.