Bergara HMR Pro Rifle 28 Nosler 26" Barrel Tactical Grey Cerakote
Think of our Premier Series as custom quality, but with standardized features for greater efficiencies in parts production and assembly – providing near custom performance at prices that are affordable to serious shooters. Bergara’s Premium stainless steel barrels receive a proprietary honing process at our barrel-making facility in Bergara, Spain. Then, at the Bergara USA factory, the barrel receives a Tactical Grey Cerakote finish and is coupled with our proprietary Bergara PREMIER action, featuring a nonrotating gas shield, coned bolt nose, and sliding plate extractor.
This action is designed as a two-lug system that features a separate floating bolt head to ensure contact with the lug abutments in the action. It also features a cone-shaped bolt nose for smooth feeding of the cartridge, and a spring-loaded sliding plate extractor located in the front of the lower locking lug. The one-piece bolt body is stainless steel with a pad at the rear to accept the threaded-in bolt handle. The bolt head, the non-rotating gas shield, the bolt handle, and bolt shroud are fully Nitrided for extreme durability, as well as its self-lubricating properties.
The two-position safety is part of the trigger assembly, which in the HMR Pro rifle is a TriggerTech Frictionless Release Technology trigger. One great feature of this combination allows the bolt handle not to lock in the closed position, which in turn allows the rifle to be unloaded while in the safe position. The HMR Pro offers three barrel lengths, 20", 24", and 26".
The stock on the Bergara Premier HMR Pro (Hunting and Match Rifle) has an integrated mini-chassis for repeatable bedding. It supports a fully free-floated barrel. The stock has an adjustable cheek piece and length of pull spacers as well as integrated QD flush cup sling mounts and swivel mounts.
• Weight: 9.3 lbs-9.8 lbs
• Overall Length: 40”-47.5”
• Barrel Length: 20”-26”
• Magazine: AICS style detachable
• Mag Capacity: 5 round mag provided, 3 round mag: 6.5 PRC
• Trigger: TriggerTech Frictionless Release Technology™
• Barrel Taper: No. 5.5 – No. 6
• Muzzle: Threaded 5/8-24” with thread protector
• Finish: Tactical Grey Cerakote
• Stock: Bergara HMR Molded with mini-chassis featuring an adjustable cheek piece and length of pull spacers
• Scope Mount: Fits Remington 700 bases with 8-40 screws
• Integrated QD flush cup sling mounts and swivel mounts
• Full-length Integrated mini-chassis for repeatable bedding and supports fully free-floated barrel
The information below comes from our Gun Caliber Dictionary and is for
general reference only. It does not describe the specifications of this
particular item.
The 28 Nosler is Nosler Bullets' second proprietary cartridge, following the 26 Nosler in 2015. It is based on the 26 Nosler necked up to 7mm, thus based on the 7mm Remington Ultra Magnum case shortened…which was based on the 404 Jeffery case. Case length is 2.590 inches, allowing it to be housed in standard (30-06-length) actions. The base diameter is .550-inch, with the rim slightly rebated to .543-inch. The 28 Nosler has been the most popular of the Nosler series. It is not as overbore capacity as the 7mm RUM, making it more efficient and allowing a greater variety of propellants. With a 26-inch barrel velocity of up to 3300 feet per second is possible with a 160-grain bullet, making it, as Nosler describes it, "the most powerful 7mm in the world." Nosler is the primary source for ammunition, but in addition to Nosler rifles it has been chambered in numerous custom and semi-custom rifles.
—
Craig Boddington
