Daniel Defense DDM4 V7 Cobalt AR15 Style Semi-Auto Rifle .223 Remington 16" Chrome Moly Vanadium Steel (1)-30Rd Mag Black Finish
The DDM4 V7 AR15 style firearm features M-LOK attachment technology with the Daniel Defense MFR 15.0 rail. Built around a Cold Hammer Forged, 16 inch barrel, the V7 has a DD improved Flash Suppressor to reduce flash signature. The mid-length gas system provides smooth and reliable cycling under any condition and reduces both perceived recoil and wear on moving parts. With the M-LOK attachment points that run along 7 positions and an uninterrupted 1913 Picatinny rail on top, the V7 has plenty of room for the sights, optics, and accessories the user may require. The independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters. This rifle also comes with the ergonomic Daniel Defense Buttstock and Pistol Grip.
Materials & Construction
• LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
• UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
• BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 16" Government Profile, Mid-length Gas System, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
• GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement
• MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
• BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
• BUFFER: H Buffer
• SIGHTS: Sold Separately
• HANDGUARD: Daniel Defense MFR 15.0, CNC Machined of 6061-T6 Aluminum, M-LOK Attachment, Type III Hard Coat Anodized
• CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized
• RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
• BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
• PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
• Made in the USA!
Specifications
Mounting System: M-LOK
Caliber: 5.56mm NATO
Muzzle Thread: 1/2x28 TPI (Threads Per Inch)
Gas System: Mid-length
Barrel Length: 16"
Barrel Profile: Government
Product Weight: 6.2 LBS
Length: 32 1/4"-35 7/8"
Magazine: DD Magazine
Case: Daniel Defense Full-Latch Impact Plastic Case
The information below comes from our Gun Caliber Dictionary and is for
general reference only. It does not describe the specifications of this
particular item.
Introduced in 1964, the 223 Remington is the civilian version of the 5.56x45mm NATO cartridge. Although very similar to the 222 Remington it has a slightly longer case and a shorter neck, giving it greater powder capacity and thus higher velocity--which was necessary to meet military penetration requirements at longer range. NOTE: 223 Remington ammunition may be safely fired in any 5.56x45mm chamber, but 5.56x45mm ammunition SHOULD NOT BE USED in a 223 chamber! Standard is a 55-grain bullet at 3240 feet per second, with lighter bullets somewhat faster and heavier bullets a bit slower. The 223 is the most popular 22 centerfire today, and possiby the most popular centerfire cartridge. Ammunition choices are legion, as are choices in firearms. The 223 is an accurate cartridge ideally suited for varmint hunting out to beyond 300 yards, and with heavy-bullet loads designed for the purpose is used effectively by many deer hunters.
—
Craig Boddington
