Winchester Model 70 Extreme Weather Bolt Action Rifle 6.5 PRC 24" Fluted Barrel 3 Round Capacity Drilled & Tapped Black Bell and Carlson Synthetic Stock Matte Stainless Steel Finish
New for 2021 — Legendary bolt-action hunting rifle for adverse weather conditions. Bell and Carlson stock with aluminum bedding block, matte stainless action and fluted barrel with muzzle brake, M.O.A. trigger system, Pachmayr Decelerator recoil pad.
Extreme accuracy and recoil control in tough shooting conditions. The Model 70 Extreme Weather MB utilizes a Bell and Carlson™ lay-up composite stock that provides a solid feel and features trim and lightweight ergonomics. It has a textured charcoal gray matte finish for rugged good looks and improved grip in adverse conditions. The sculpted cheekpiece helps insure proper eye-to-scope alignment from any shooting position. The thick, black Pachmayr® Decelerator® pad helps take the felt recoil bite out of high-performance magnum cartridges.
Other key features. Like all Model 70s today, it features the Pre'-64 type claw extractor with Controlled Round Feeding so the cartridge may be easily withdrawn from the chamber at any point after it leaves the magazine. It also means that the cartridge base is grabbed by the claw as it leaves the magazine so it enters the chamber straight, in line. And don't forget that the cartridge feed lips are machined as part of the receiver for improved reliability in feeding. The classic Three-Position Safety offers both on safe and fire positions, plus a middle position that locks the firing pin yet still allows the bolt to be operated, providing a greater margin of safety when checking the chamber condition or unloading.
Accuracy is paramount. The Extreme Weather MB rifle's free-floating fluted stainless steel barrel is made in the same factory as those found on U.S. military rifles and machine guns, and features a recessed target crown to protect the rifling. With quality optics, premium ammunition, and good shooting conditions, 1 MOA accuracy can be expected — if you, your ammo and your optics are up to it. The fluted barrel allows us to give you a stiffer barrel profile that does not carry excessive weight. So the Extreme Weather MB feels very light but offers accuracy of a heavier rifle. Two stainless steel sling swivel studs are installed as expected. In fact, all major components are stainless to keep you gun looking and working well year after year in tough conditions. You will need to buy scope bases and rings to match your setup separately, so don't forget. (The scope and mounts in the photo above are not included.) The line-up of hunting calibers is more than adequate, taking you from crossover big game/varmint calibers to hard hitting magnum calibers sufficient for practically everything you could want to hunt: . . . whitetails, mule deer, elk, sheep, goats, bears, moose, etc. Check the blogs and you'll read how many consider it the perfect elk rifle.
Bell & Carlson makes a uniquely high-quality product. That is the reason Winchester Repeating Arms has teamed with them over the years to produce our finest specialty rifles. With features like a proprietary molding system that maximizes strength and one of the industry's most acclaimed aluminum bedding block designs (for a total lock from action to stock), you get superb accuracy, ideal balance and strength only possible with non-traditional stock engineering.
The Extreme Weather does not have a traditional injected type stock. As per specifications developed by Bell and Carlson and Winchester Repeating Arms, the stocks are ''constructed using a 'hand lay-up' process, using a variety of composite materials. These composites — including fiberglass, aramid fibers, graphite, epoxy gel coats and laminating resins; and polyurethane reinforcement with milled fiberglass — provide a warm and solid feel rather than the hollow feel one gets from injection molded stocks.'' The Extreme Weather stock is rel
Caliber Dictionary
The Below Information Has Been Provided From Our Gun Caliber Dictionary And Is Meant For Informational Purposes Only. It Is Not Intended to Describe The Unique Specifications For This Ammunition.
The 6.5 Precision Rifle Cartridge (PRC) is one of the newest cartridges from a major manufacturer, introduced by Hornady in 2017. Based on Hornady's .375 Ruger/Ruger Compact Magnum unbelted case, the 6.5 PRC requires a .532-inch bolt face, same as standard belted magnums. With a 2.030-inch case it can be housed in short bolt actions, and case length allows use of long-for-caliber 6.5mm bullets. Obviously it trades on the success of the 6.5mm Creedmoor, and also on the renewed interest in the ranging abilities of the 6.5mm (.264-inch) bullet diameter. Interestingly, ballistics are similar to the old .264 Win Mag introduced back in 1958 with a 140-grain bullet at almost 3000 fps It is thus faster than the Creedmoor and .260 Rem, but much slower than new super-fast 6.5mms like the 26 Nosler and 6.5-300 Weatherby Mag With its modern case design it is seems almost certain to find favor with the growing number of long-range shooters!
Utilizing moderate powder charges that result in repeata — Craig Boddington
