Nosler 65160 Varmageddon is specifically designed to be the end of the world for any varmint in its path. Available with either a hollow point or polymer tip, this flat based bullet design delivers high velocities and extreme terminal performance on varmints at long ranges. Produced in 7 popular calibers, Varmageddon ammunition is sure to meet all your varmint hunting needs. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
Technical Information :
- Caliber: 243 Winchester
- Bullet Weight: 55 Grains
- Bullet Style: Hollow Point Flat Base
- Case Type: Brass
- 20 per box
Ballistics Information:
- Muzzle Velocity: 3800 fps
- Muzzle Energy: 1764 ft. lbs.
243 Winchester 55 Gr Flat Base Hollow Point (Per 20)
The information below comes from our Gun Caliber Dictionary and is for
general reference only. It does not describe the specifications of this
particular item.
Introduced in 1955, the 243 Winchester is based on the 308 Winchester case necked down. It was the first commercial cartridge added to the "308 family," with a 2.045-inch case designed to fit into Winchester's Model 88 lever action and short bolt actions. Winchester saw it as a combination "varmint and big-game" round, with an 80-grain varmint bullet at 3550 feet per second and a 100-grain deer bullet at 2960. Apparently the public saw it the same way; the 243 Winchester is the world's most popular 6mm cartridge, with current loadings running from a 55-grain varmint load at nearly 4000 fps to 108 grains. 6mm bullets hold up better in wind than smaller calibers, so the 243 remains a favorite for long-range varminting. With heavier bullets it is very effective on deer-sized game. Its attributes are accuracy, light recoil, and deadly effect; it is a standard choice for beginning hunters. Because of its popularity factory loads are legion, and most rifle manufacturers offer it.
—
Craig Boddington
No reviews yet
Be the first to review this item.
Shipping
Enter your ZIP code for an exact shipping cost on this item.
Hazardous-materials fees, where they apply, are included in the total shown.